General Usage Instructions

Below you will find both how to use your wand based on what issue you are wanting to treat as well as general usage guidelines and FAQS.

Preparation

1. Cleanse Your Skin: Start with a clean, dry face or scalp. Remove any makeup, oils, or lotions.
2. Choose the Appropriate Attachment: Select the attachment suited for your treatment (bend attachment for acne, mushroom attachment for larger areas, comb attachment for hair growth).
3. Ensure Proper Function: Check that the wand is functioning correctly before beginning your treatment.

Safety Precautions

1. Avoid Metal: Remove all metal jewelry and avoid using the wand on areas with metal braces or hardware.
2. Pregnancy: If you are pregnant, it is recommended to avoid using the wand due to a lack of studies on its effects.
3. Sensitivity Check: If you experience any discomfort or pain beyond a mild tingling sensation, lower the intensity or discontinue use.

Maintenance and Cleaning

1. After Use: Clean the attachments with a disinfectant wipe or a soft cloth after each use.
2. Storage: Store the wand in a cool, dry place, away from direct sunlight and moisture.

Acne Treatment

Preparation

1. Cleanse and Dry: Ensure the affected area is clean and completely dry before starting.

Using the Bend Attachment

1. Connect Attachment: Secure the bend attachment to the wand.
2. Adjust Intensity: Start at the lowest frequency setting.
3. Treatment: Gently hover the attachment over the affected area for 5-10 seconds at a time. Do not treat the same spot for more than 30 seconds per session.
4. Frequency: Use the wand every other day initially. If well-tolerated, you may increase the frequency by 1-2 ticks each week.
5. Duration: Limit treatment to 2-5 minutes per session.

Post-Use

1. Apply Moisturizer: After using the wand, apply a moisturizer directly to the treated area to start the healing process. A water-based moisturizer with hyaluronic acid is preferred, but any moisturizer can be used.

Weekly Adjustment Guidelines

1. Monitor Sensitivity: If you experience pain, reduce the intensity and allow your skin to adjust before increasing the frequency again.
2. Increase Gradually: Once your skin adapts, you can gradually increase the intensity by 1-2 ticks each week.

Anti-Aging Treatment

Preparation

1. Cleanse and Dry: Ensure the area you wish to treat is clean and dry.

Using the Mushroom Attachment

1. Connect Attachment: Secure the mushroom attachment to the wand.
2. Adjust Intensity: Begin at the lowest frequency setting.
3. Treatment: Move the wand in circular motions over the desired area for 15-20 seconds at a time.
4. Frequency: Use the wand every other day to start. Increase the intensity by 1-2 ticks weekly if tolerated.
5. Duration: Limit treatment to 5-7 minutes per session.

Post-Use

1. Apply Moisturizer: After using the wand, apply a moisturizer directly to the treated area to start the healing process. A water-based moisturizer with hyaluronic acid is preferred, but any moisturizer can be used.

Weekly Adjustment Guidelines

1. Monitor Sensitivity: If you feel pain, lower the intensity for the next few sessions. Gradually increase the frequency as your skin adapts.

Hair Growth Treatment

Preparation

1. Cleanse and Dry: Ensure your scalp is clean and free of any products.

Using the Comb Attachment

1. Connect Attachment: Secure the comb attachment to the wand.
2. Adjust Intensity: Start with a medium frequency setting.
3. Treatment: Comb through your scalp 5-10 times per area you wish to stimulate for hair growth.
4. Frequency: You may use the wand daily if desired due to lower irritation risk.
5. Duration: Limit treatment to 5-7 minutes per session.

Weekly Adjustment Guidelines

1. Monitor Sensitivity: If you experience discomfort, reduce the intensity and allow your scalp to adjust before increasing the frequency.

Troubleshooting and FAQs

Common Issues and Solutions

• Painful Sensation: Lower the intensity of the wand. A mild tingling is normal, but burning or pain indicates the setting is too high.
• Uneven Results: Consistency is key. Ensure you follow the recommended frequency and duration for best results.

FAQs

• Can I use the wand on sensitive skin? Yes, but start with the lowest intensity and gradually increase as tolerated.
• How soon will I see results? Results vary by individual. Typically, noticeable improvements can be seen after several weeks of consistent use.
• Is the smell normal? Yes, it is. The smell comes from the oxidation of the gas in the electrode, which is part of the process of creating the frequency you see. This is not your skin burning and is completely normal and safe. Rest assured, it’s a natural part of the high-frequency treatment.

General Usage Instructions

Below you will find both how to use your smart cupping massager based on what issue you are wanting to treat as well as general usage guidelines and FAQS.

Preparation

1. Cleanse the Skin: Begin by washing the target area with mild soap and warm water. Pat dry with a clean towel.
2. Apply Oil: Use a generous amount of massage or essential oil of your choice to reduce friction and enhance the glide of the device.
3. Power On the Device: Turn on the massager and select your desired heat level. Start with a low heat setting (e.g., 1–3) if you're new to the device, gradually increasing as you become more comfortable.

4. Choose Your Mode:

• Soothing Breathing Mode: Ideal for relaxation and sensitive skin.
• Deep Negative Pressure Mode: Best for intensive therapy and targeting cellulite.

Safety Precautions

Important Safety Reminders

Please read and understand this section to prevent personal injury that may be caused by incorrect operation.

• Always start with the lowest settings and increase gradually.
• Avoid using the device on broken, irritated, or inflamed skin.
• Do not use the device on areas with varicose veins, scars, or moles without consulting a healthcare professional.
• Limit usage to 20 minutes per session for a single area.
• If bruising or discomfort occurs, use the pressure release button. Reduce the suction level for your next session or take a break between sessions.

Do not use the following medical electronic equipment at the
same time as it may cause errors or damage to medical instruments, which can be life threatening.
1. Implantable medical electronic devices such as a cardiac pacemaker
2. Life-sustaining medical electronic devices such as artificial hearts and lungs.
3. Electrocardiographs and other medical electronic instruments.
4. Patients with other medical implants.
5. Keep out of reach from children.

Bruising and Blisters
• Bruising after cupping is normal and a good sign that your therapy is
effective and it's bringing toxins up to the skin, however, it is possible that
our smart cupping massager, or any kind of cupping therapy, may form blisters on the skin.
• Although it is rare, blisters form due to overuse as a beginner (high
intensity/prolonged session), negligence to disinfect the skin or device prior to use, or simply because your skin type is sensitive to cupping
therapy and/or heat.
• This is why we strongly advise beginners to start off very slowly at low
intensity levels, using your device for just a couple minutes per muscle group to get a good feel for how their skin reacts.
• Again, blisters are extremely rare but a possibility due to the nature of
cupping therapy, please pay close attention to each session and stop
using your device immediately if you feel strong discomfort or blisters forming.
• If you are not comfortable with the possibility of blisters, burns, or bruises
do not use our device or partake in cupping therapy. We are not
responsible for any skin damage due to misuse or very sensitive skin.

Maintenance and Cleaning

1. After Use: Clean the attachments with a disinfectant wipe or a soft cloth after each use to remove excess oil.
2. Storage: Store the device in a cool, dry place, away from direct sunlight and moisture.

For Cellulite Treatment

Follow these steps to target cellulite effectively:

1. Warm-Up

• Begin by choosing your comfortable heat setting. Allow the device to preheat for a few seconds before application.
• Apply a generous amount of your chosen oil to reduce friction and assist the device to glide across the skin.
• Use the soothing breathing mode for the warm-up phase.
• Gently glide the device over the cellulite-affected area for 3–5 minutes to stimulate circulation and prepare the tissue.

2. Targeting Cellulite

• Switch to deep negative pressure mode to tackle deeper layers of skin and fat.
• Adjust the suction setting gradually:
• Work in circular motions over the area for 10–15 minutes. Avoid leaving the device in one spot to prevent skin irritation.
• Focus on common cellulite-prone areas such as thighs, buttocks, and abdomen.

3. Post-Treatment

• After treatment, switch back to soothing breathing mode and reduce suction to level 1–3.
• Gently glide the device over the area for 3–5 minutes to cool down the skin and relax the tissues.

Tips for Best Results

• Use the massager 2–3 times per week for optimal cellulite reduction.
• Stay hydrated before and after your session to flush out toxins.
• Combine treatments with a healthy diet and regular exercise for enhanced results.
• Avoid using the device on broken, irritated, or inflamed skin.

For Muscle Relaxation

Steps:

1. Set the heat to your determined comfortable medium or high level (e.g., 6–9) to help relax tight muscles.
2. Choose Soothing Breathing Mode for gentle, rhythmic therapy.
3. Place the massager on the target area (e.g., back, shoulders, or legs) and let it remain stationary for 2–5 seconds before moving to the next spot.
4. For deeper tension relief, switch to Deep Negative Pressure Mode and glide the device slowly over the muscles using moderate suction levels (e.g., 2–8).
5. Repeat for 10–15 minutes.

For Improving Circulation

Steps:

1. Use a low to moderate heat setting (e.g., 1–6) to gently stimulate blood flow.
2. Select Soothing Breathing Mode and set the suction to a low level (e.g., 1–4).
3. Glide the massager in upward motions along the limbs (e.g., from calves to thighs or wrists to shoulders).
4. Use for 5–10 minutes per area.

For Pain Relief in Specific Areas

Steps:

1. Apply a heat setting that feels comfortable (e.g., 5–8).
2. Use Deep Negative Pressure Mode for intense therapy on areas such as the lower back or stiff neck.
3. Place the massager on the painful area and hold it steady for 10–20 seconds, press the suction release button to release the device off the skin, then move to the next spot and repeat.
4. Continue until the pain feels alleviated, but avoid exceeding 20 minutes on any one area.

For Stress Relief and Relaxation

Steps:

1. Apply a heat setting that feels comfortable (e.g., 5–8) and select Soothing Breathing Mode.
2. Focus on areas prone to tension, such as the shoulders, neck, or feet.
3. Glide the massager slowly over the skin in circular or upward motions.
4. Use for 10–15 minutes to promote relaxation and ease stress.

For Skin Tightening and Toning

Steps:

1. Set a low heat level (e.g., 1–4) to prevent skin irritation.
2. Choose Deep Negative Pressure Mode and adjust suction to a gentle level (e.g., 1–5).
3. Use the device in upward strokes or circular motions on areas like the arms, abdomen, or thighs.
4. Perform this routine 2–3 times a week for best results.

Aftercare Tips for All Uses

• Clean the skin with a damp cloth to remove excess oil.
• Gently massage the treated area with your hands to further enhance circulation.
• Drink plenty of water post-treatment to support detoxification.

Important Safety Reminders

• Always start with the lowest settings and increase gradually.
• Avoid using the device on broken, irritated, or inflamed skin.
• Do not use the device on areas with varicose veins, scars, or moles without consulting a healthcare professional.
• Limit usage to 20 minutes per session for a single area.